Ben Eater 6502 Kit — Day 2

Starting to work on the clock for the computer. The finished computer will have three clocks:

1. A full speed 1 MHz clock.
2. A slow adjustable clock.
3. A single step clock.

This is the setup for the for the 2nd option, the slow adjustable clock

You don't actually need a multimeter but it you don't know the colour codes for the resistors or have difficulty reading the tiny print on the capacitors then a good multimeter is helpful. Just measure them to see which is which.

Mind you, one there was no 100kΩ resistor in the kit only 1MΩ so the LED blinked 10 times slower. Which wasn't a bad thing.

After the first function test the potentiometer is added to make the clock adjustable and also two capacitors to smoothen out voltage peaks

That was quick and very easy.